School Residential Zone Conduct
- 1/30When driving near a school zone, you should reduce your speed to
Children may cross the road unexpectedly, so slower speeds allow you to stop safely. Always obey posted school zone limits and be alert for crossing guards.
School zones are usually active during
These times vary by location but often occur in the morning and afternoon. Look for warning signs and flashing lights that indicate active times.
When approaching a school crossing, always be prepared to
Children often use marked or guarded crossings. Slow down, yield completely, and never overtake near a crossing zone.
The appropriate lane position when driving through a residential area is
Avoid swerving or hugging the curb. Stay alert for parked cars, pets, and sudden movement from children.
Honking in residential zones should be used
Excessive noise disturbs the peace and can startle people. Use your horn briefly only if needed for safety.
Before reversing out of a driveway in a residential area, you must
Always look behind and use mirrors or rear cameras if available. Children playing may be in your blind spot.
Overtaking in a school or residential zone is
These areas require full driver attention due to high pedestrian activity. Overtaking poses a serious risk and is illegal.
Parking near school gates during drop-off times is
Blocking school gates disrupts traffic flow and endangers children. Use designated drop-off points only.
When driving past parked cars in residential areas, you should
Children or pets may suddenly dart out between vehicles. Slow speeds help you react quickly to surprises.
Flashing amber lights in a school zone indicate
These signals warn you to slow down and watch for crossing students. Obey any additional signage and slow to posted limits.
Stopping your vehicle on a pedestrian crossing near a school is
This blocks visibility for both pedestrians and drivers. Always stop behind the crossing line, giving full right of way.
In residential zones, you should watch out for
Residential streets often have distractions and unpredictable behavior. Reduce your speed and scan both sides of the road.
Drivers should avoid using high beams in residential areas because
Use low beams to avoid causing glare or discomfort. High beams are inappropriate in well-lit or populated zones.
You must always yield to pedestrians at
These crossings are protected by law. Failing to yield here can result in fines or license demerits.
Residential roads often have speed bumps to
Bumps serve as physical reminders to reduce speed. Drive over them slowly to protect your vehicle and improve safety.
Use of mobile phones while driving in residential areas is
These areas demand full concentration due to high pedestrian activity. Avoid all distractions and use hands-free if necessary.
Driving with music at high volume in a residential area is
Loud music can drown out important sounds like sirens or children. Keep volume low and windows up when in neighborhoods.
Near playgrounds and parks, drivers must
Children may run across the road without warning. Treat these areas like school zones and stay highly alert.
If a school bus stops with flashing lights, you should
Children may be boarding or crossing in front of the bus. Stay stopped until the lights turn off and it is safe to proceed.
In a gated residential neighborhood, speed limits are typically
These reduced speeds prevent accidents in tight, pedestrian-heavy areas. Always follow the posted signs within the compound.
When turning at an intersection in a residential zone, signal
This gives others time to react. Clear signaling is crucial near homes, schools, and narrow roads.
School crossing signs are often accompanied by
These visuals increase driver awareness. Slow down immediately upon seeing them and be ready to stop.
If a ball rolls onto the road in a housing area, you should
A child may follow it. Expect the unexpected in residential neighborhoods and always drive cautiously.
If students are crossing without a designated crossing guard, you should
Children may not judge vehicle speed accurately. Give them space and avoid rushing through crosswalks.
When exiting a residential road on to a main road, check for
Side streets often have obstructed views. Pause, check all sides, and proceed only when It is safe.
Use of hazard lights in a school zone while stopped is
Use hazards only if you are parked briefly in a permitted area. It alerts others to your presence without confusing traffic.
Residential roads with parked cars on both sides require
Lane width is limited, and children may be hidden. Proceed slowly and yield when necessary.
At dawn or dusk in residential zones, turn on
Visibility is low during these times. Using low beams ensures you are seen by pedestrians and other vehicles.
The safest way to reverse out of a residential driveway is to
Always scan for pedestrians, use mirrors, and reverse in a controlled manner. Ask someone to assist if visibility is blocked.
When cyclists or children are on the roadside, drivers should
Keep a safe distance to avoid startling or hitting them. Be prepared to stop at any time.